Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Repair Across Irving
A garage door repair in Irving typically runs $150 – $600, and most jobs are done same day. If you’re in Las Colinas, Valley Ranch, or south Irving near MacArthur Boulevard, we’re already familiar with your neighborhood’s door styles and the hail damage that comes with April through June. Call us at (512) 883-4374 and you’ll get a live person, a written price before any wrench turns, and a tech you can track on the way to your house.
Irving’s garage doors take a beating that doors in other parts of the metro don’t. We’re not just talking about normal wear. Hailstones the size of golf balls crack panels, knock doors off track, and strain springs that were already working overtime in the Texas heat. When you call us, you’re calling people who understand that a Valley Ranch carriage door isn’t a generic panel you can swap from any warehouse shelf.
Why Marlow Garage Door Repair Is Irving’s Preferred Garage Door Repair Company
We started in 2002, and from the beginning we built the company around one frustration every homeowner knows: calling a repair service and getting a four-hour window, a vague quote, and a bill that doesn’t match what was discussed on the phone. That’s not how we work. Every job starts with a written price. You agree to it before we touch the door. The invoice matches the number you saw.
Jaylen Ross leads our Irving service area, and the standard he set is simple: background-checked, uniformed technicians who show up when they say they will, with parts for the eight major garage door brands already on the truck. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors. That matters in Irving because Las Colinas and Valley Ranch HOAs often require specific manufacturers for replacement panels. We source the right panel, match the color, and keep the HOA happy.
Our 365-Day Done Right Promise covers every repair. If the fix doesn’t hold, we come back free within a full year. That’s stated in writing, not buried in fine print. Homeowners across Irving call us because they want the job done once, correctly, with no second-guessing.
Garage Door Roller Replacement in Irving
Garage Door Roller Replacement in Irving is one of the most common calls we get after a hailstorm, because impact damage doesn’t just dent panels, it shoves the door off alignment and the rollers take the abuse. Roller replacement runs $110 – $220 depending on how many rollers, whether they’re nylon or steel, and whether we’re also realigning the track. You’ll get the exact number in writing before we start.
Why Rollers Fail on Irving Doors
Texas heat dries out the bearings inside garage door rollers. When those bearings seize, the roller grinds against the track instead of rolling, and the door gets loud, jerky, and eventually binds. Homes in north Irving with double steel doors are especially prone, because the added weight accelerates roller wear. We replace seized rollers before they snap and send the door crashing down.
What the Job Involves
We inspect all rollers, not just the one that failed. If one roller has seized, its neighbors are usually close behind. We quote the full set if needed, explain what each roller costs, and you decide before we replace anything. Most Irving roller replacements take under an hour per door, including track lubrication and balance testing.
Commercial Garage Door Repair in Irving
Commercial Garage Door Repair in Irving is a different animal from residential work, and it’s one of the service lines we emphasize here. Warehouses along Belt Line Road, retail bays in Las Colinas, and municipal buildings all have heavy-duty doors that cycle dozens of times a day. When one fails, the whole operation stalls. Commercial repairs run $150 – $600 depending on the door weight, the cycle springs, and whether we’re replacing sections or just realigning.
Heavy-Duty Springs and Openers
The commercial doors we see in Irving are frequently 12 to 14 feet tall and weigh hundreds of pounds. They demand high-cycle torsion springs, not the standard residential pair. When a business owner calls us because the door won’t lift, we often find the spring snapped after half a million cycles and the opener motor burned out trying to compensate. We replace both correctly sized for the door’s actual cycle count, and we quote it before we start.
Minimizing Downtime
For Irving businesses, every hour the bay door is down costs money. We carry commercial-grade parts on the truck: heavy-duty rollers, industrial springs, reinforced track brackets. That means most commercial repairs finish same day, and we schedule the work around your loading dock hours. The written price includes everything, labor and parts, before we begin.
Trusted Brands We Service in Irving
We’re trained to service Chamberlain, Genie, Clopay, and Amarr doors, and we stock replacement parts for all of them on our Irving routes. That’s a bigger deal than it sounds. A homeowner near University of Dallas with an aging Chamberlain opener doesn’t want to wait three days for a logic board to ship from a warehouse in Ohio. We carry the common boards, sensors, and springs for the brands we service, so the fix happens in one visit, not two or three. If your door is a Clopay steel model from the 1990s south Irving ranch era, we know what parts fit and what doesn’t, our Garage Door Repair team sees these every week.
Common Garage Door Repair Problems We See in Irving Homes
- Hail-dented panels knocked off track. Irving’s April through June hail corridor means sectional doors take direct hits. The panel dents, the track bends, and the door jams halfway up. We often replace the damaged panel and realign the track in the same visit.
- Heat-warped tracks and dried-out lubricants. A 100°F plus summer day in Irving expands steel tracks. When the door runs out of alignment, the rollers bind. We see this constantly on two-car steel doors in north Irving brick homes built in the 1980s and 1990s.
- Torsion spring failure on heavy double doors. Irving garage doors are often two-car models weighing 150 to 350 lbs. The torsion spring, the horizontal coil above the door that does the lifting, eventually fatigues. When it snaps, the door slams down or refuses to open. Spring replacement runs $180 – $340.
- Opener strain from a failing spring. Homeowners often call us convinced their opener is dead. In reality, the spring lost tension, the opener has been lifting the full door weight for months, and the rail and gears are shot. Replacing just the opener without fixing the spring guarantees another failure. We diagnose the root cause and quote everything in writing.
Pricing for Garage Door Repair in Irving, TX
| Service | Price Range |
|---|---|
| Garage Door Repair | $150 – $600 |
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2200 |
What moves the price within those ranges is mostly door size, spring type, and whether we’re sourcing a specific panel to match your HOA. A standard single-car door with a basic panel costs less than a three-car carriage-house door that needs an Amarr panel matched to the existing color in Valley Ranch. Call (512) 883-4374 and we’ll give you a free, exact estimate before you schedule.
We Also Serve Cities Near Irving
We handle Garage Door Repair in Irving and run routes through the surrounding cities: Dallas, Balch Springs, Hutchins, and Mesquite. If you’re right on the Irving-Dallas line, don’t worry about which office covers you, call us and we’ll tell you straight. The live person answering the phone dispatches for all these areas.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in Irving
My Irving garage door opener strains to lift the door – is it the opener or the springs?
In most cases we diagnose in Irving, the springs are the root cause, not the opener. A torsion spring that has lost tension forces the opener to lift the full weight of a 150 to 350 lb door. Over months, that destroys the opener rail and gears. We test spring tension first, because replacing only the opener will leave you with the same problem in a year. Call (512) 883-4374 and we’ll diagnose it on the first visit.
Do I need high-cycle springs for my Irving garage door?
Yes, and this is one of the most important recommendations we make to Irving homeowners. Standard springs last about 10,000 cycles, roughly 5 to 7 years for a typical two-car door. Irving’s heat and temperature swings stress springs further. High-cycle springs last 25,000 to 60,000 cycles. They cost a bit more than standard springs, but they’re the right call for heavy double doors and garage doors that cycle several times a day.
Will a hail-dented garage door panel from a Las Colinas storm match my HOA color?
Yes, if we source the panel from the correct manufacturer. Las Colinas and Valley Ranch HOAs often mandate that replacement panels match the original carriage-house style and color. We order from the exact manufacturer, confirm the color code, and verify the match before installation. You’ll see the spec sheet and the price in writing before we order.
My older south Irving home has a lead-painted wooden garage door – can you still repair it?
We can, but the process is different. Homes built before 1978 in south Irving may have original wooden doors with lead-based paint. We don’t sand or scrape those doors; we stabilize the paint and handle the door under containment procedures. If the door needs replacement, we remove it whole and handle disposal under the same lead-safe protocols. We’ll explain exactly what the job requires and quote it in writing before we start.
How long does track realignment or roller replacement take on an Irving door?
Track realignment typically takes 45 to 90 minutes. Roller replacement runs 45 to 60 minutes for a standard two-car door. Both jobs finish in one visit, and we carry the rollers, brackets, and lubricants on the truck. Call (512) 883-4374 for an exact timeframe based on your door.
Call Marlow Garage Door Repair in Irving
When your door is stuck, dented, or grinding, you want a repair that’s done right, priced in writing, and backed for a year. That’s exactly what we do. Call (512) 883-4374 and a live person answers, 24/7. You’ll get a written price before any work starts, a tech you can track on the way to your Irving home, and a 365-Day Done Right Promise on every repair.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair, serving Irving since 2002.