Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Spring Repair Across Arlington
A broken garage door spring in Arlington usually means one thing: your door won’t open, your car is stuck inside, and you need a fix today. Spring replacement in Arlington, MA typically runs $180 – $340, depending on whether you have a torsion or extension spring system. Most repairs are done in a single visit. We’ve worked on the 16×7 steel doors common to Arlington’s 1980s and 1990s tract housing for years, and we know exactly which springs those doors take before we even pull up. Call us at (512) 883-4374 and you’ll get a real person on the line, right away.
Why Marlow Garage Door Repair Is Arlington’s Preferred Garage Door Spring Repair Company
Arlington homeowners don’t have time for four-hour windows or techs who show up without the right parts. Our technicians arrive in uniform, background-checked, and trained on the specific hardware Arlington’s housing stock demands. We carry torsion and extension springs sized for 16×7 steel doors on the truck, so the fix actually happens the same day. Before any wrench turns, you get a written price. That number is locked, regardless of what we find after the door is open.
Jaylen Ross leads our team with a simple rule: name the price, honor the price, and stand behind the work for a full year. Every spring repair in Arlington is covered by our 365-Day Done Right Promise. If the fix fails within 12 months, we return and make it right at no charge. That’s in writing, on every invoice, with no fine print.
Broken Garage Door Spring in Arlington
Broken garage door spring in Arlington is the single most common emergency call we handle, and most of the time it’s a torsion spring on an original 16×7 steel door that’s simply reached the end of its cycle life. Torsion springs are the horizontal coils mounted above the door. They do nearly all the lifting. When one snaps, the door becomes dead weight, and no opener in the world can safely move it.
Torsion Spring Failure You Can Hear
The snap sounds like a gunshot from inside the garage. If you hear that from your Arlington home, the spring is done. A standard torsion spring is rated for roughly 10,000 cycles. For a two-car garage opened four times a day, that’s about seven years. Doors built in the 1980s and 1990s around Arlington have often outlived their original springs several times over.
Why Age Matters on Arlington Doors
Older Arlington steel doors often still work fine, structurally. The spring is what fails. We stock replacement springs in the sizes those legacy doors use, and we’ll discuss upgrading to a 25,000-cycle spring at the same price point as a standard replacement in many cases. It’s not a upsell; it’s just a better spring.
Garage Door Extension Spring in Arlington
Garage door extension spring in Arlington is common on older single-car garage doors and some lighter 16×7 models. These springs run vertically along the horizontal tracks on both sides of the door and stretch under tension as the door closes. Extension springs work differently than torsion springs. They store energy by expanding, not twisting.
Extension Spring Failure and Safety Cables
When an extension spring snaps without a safety cable, a chunk of steel flies. Seriously. The springs are under hundreds of pounds of tension. We install safety cables on every extension spring replacement in Arlington, and we’ll add them to existing doors that are missing them. In many homes near Pioneer Parkway and similar neighborhoods, we find original extension springs from the 1980s that were never retrofitted with cables. That’s a hazard.
Parts Availability for Legacy Doors
Some extension spring systems on older Arlington doors use hardware that’s no longer manufactured. We keep common replacement components in stock and can source rare sizes from our Boston distribution hub within a day. You won’t wait a week for a spring.
Trusted Brands We Service in Arlington
We service springs and doors from LiftMaster, Genie, Chamberlain, and Clopay, among others. For Arlington homeowners with original builder-grade doors from the 1980s and 1990s, the brand matters less than the spring size and door weight. Our techs trained on all major brands before they ever step foot in Arlington. And because we stock local parts for Arlington’s common 16×7 steel doors, most repairs don’t require a second trip. That’s the difference between a parts runner and a technician who actually fixes doors.
Common Garage Door Spring Repair Problems We See in Arlington Homes
We see the same patterns across Arlington’s housing stock every week. Here are the four most common:
- Snapped torsion springs on original 16×7 doors. Homes built from the 1970s through the early 2000s around Arlington often still have their original springs. They fail suddenly, and usually at the worst time.
- Rusted bottom panels from sprinkler overspray. In neighborhoods near Pioneer Parkway, lawn sprinklers hitting the bottom of the door for twenty years rust the steel and destroy the weather seal. We see this constantly.
- Opener strain after a spring breaks. A dead spring forces the opener motor to lift hundreds of pounds alone. Old LiftMaster and Genie openers in Arlington die quickly under that load.
- Missing safety cables on extension spring doors. Older Arlington garages frequently lack these. They’re not optional, and we install them on every extension spring job.
Pricing for Garage Door Spring Repair in Arlington, MA
| Service | Arlington Price Range |
|---|---|
| Spring Repair | $180 – $340 |
| Garage Door Repair | $150 – $600 |
| Panel Replacement | $250 – $500 |
| Opener Repair | $120 – $320 |
The price you’re quoted is the price you pay. Written. Before work starts. No surprises on the invoice, no “well, once we got in there…” adjustments. A torsion spring on a 16×7 door in Arlington typically runs $180 – $340, and that includes the spring, labor, and full balance check. Call (512) 883-4374 for an exact quote. Estimates are free.
We Also Serve Cities Near Arlington
If your spring snapped and you’re just outside the Arlington line, we cover Arlington and the surrounding towns, including Belmont, Winchester, Medford, and Cambridge. Same written-pricing model, same 365-Day Done Right Promise. If you need Garage Door Spring Repair near Arlington, our team can usually reach you fast.
Serving Arlington, MA - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Garage Door Spring Repair in Arlington
My Arlington home was built in the 1990s – should I repair or replace the original torsion spring on my 16×7 steel door?
Replace it, and upgrade to a high-cycle spring at the same time. Original springs from that era in Arlington’s tract homes were typically rated for 10,000 cycles, and they’re at or past that number now. A 25,000-cycle spring costs a bit more but matches the remaining life of the door. If a tech tries to sell you another 10,000-cycle spring on a 25-year-old door, they’re setting you up for a second failure in a few years.
Why do so many garage doors near Pioneer Parkway have rusted bottom sections?
Lawn sprinklers. The sprinkler heads in yards around Pioneer Parkway spray a fine mist that lands on the bottom panel of the garage door every morning. Over ten or twenty years, that constant moisture rusts the steel, destroys the weather seal, and eventually rots the panel. We can replace the panel and adjust sprinkler heads so the same thing doesn’t happen again.
How can I tell if my opener is failing or if it’s actually a spring problem?
If the opener struggles, jerks, or makes a grinding noise as it lifts, that’s often a spring issue, not an opener issue. A door with a properly balanced spring should feel almost weightless when you lift it manually. If it’s heavy, the spring isn’t doing its job, and the opener is working twice as hard. We’ll diagnose it in minutes. Call (512) 883-4374 and we’ll tell you exactly what’s failing before anyone opens a toolbox.
Do you carry replacement springs for older Arlington doors with legacy hardware?
Yes. Older Arlington doors often use spring sizes and hardware that big-box stores don’t carry. Our trucks are stocked for the 16×7 steel doors and legacy extension spring systems common in Arlington’s 1970s through 2000s housing. If we don’t have the exact part, our Boston distribution hub can get it to us quickly, and we’ll still cover the repair under the 365-Day Done Right Promise.
What does spring repair typically cost in Arlington, and is it worth upgrading to high-cycle springs?
Spring repair in Arlington typically runs $180 – $340. High-cycle springs are worth it if you plan to stay in the house. They last roughly two and a half times longer than standard springs and usually cost only a modest premium. We’ll show you both prices before you decide. The quote is free, the decision is yours.
Contact Marlow Garage Door Repair in Arlington
If your garage door spring snapped in Arlington, don’t run the opener, don’t try to force the door up, and don’t touch the spring. Those springs hold enough tension to seriously hurt someone. Call us instead. We’ll get a tech to your Arlington home, put a written price in your hand before any work starts, and back the repair for a full year. Reach us at (512) 883-4374 and we’ll have you back on track today.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair, serving Arlington since 2002.