Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Spring Repair Across Hudson
A snapped garage door spring in Hudson, MA typically costs $180 – $340 to repair, and Marlow Garage Door Repair can usually get a technician to your home the same day you call. That spring above your door is under enough tension to lift several hundred pounds, and when it fails, your door is not opening until it’s replaced. We’ve worked on more Hudson garage doors than we can count, and we know exactly what these New England winters do to them. Call (512) 883-4374 for a free estimate, or book online and watch your tech’s arrival time live.
Why Marlow Garage Door Repair Is Hudson’s Preferred Garage Door Spring Repair Company
Hudson homeowners keep calling us back because we do something most garage door companies won’t: we show you the written price before we touch a single bolt. Not a ballpark. Not “we’ll see once we get in there.” A real number, on paper, agreed to before work starts. That’s the Relay Visibility Guarantee, and it’s standard on every job we do in Hudson.
Our techs know this town. They know the mill-era garages along the Assabet River, the ranches off Main Street, and the newer builds near the Marlborough line. They arrive background-checked and in uniform, so you know exactly who’s walking up your driveway. And every repair is covered by our 365-Day Done Right Promise: if the fix fails within a year, we come back and make it right for free. Jaylen Ross and the rest of our team built Marlow around a simple idea: garage door repair should feel as transparent as ordering a ride from your phone. You see the price. You see the tech coming. You pay from a link when it’s done.
Garage Door Extension Spring in Hudson
Garage door extension spring work in Hudson is something we handle constantly, especially on older homes where the springs stretch along the horizontal tracks on either side of the door rather than coiling above it. These springs do the heavy lifting by stretching and contracting, and after years of freeze-thaw cycles and daily use, they lose tension, sag, and eventually snap. In Hudson’s older stock, we routinely find original extension springs on doors that are thirty, forty, even fifty years old.
When a Hudson homeowner hears a loud bang from the garage and the door won’t lift, it’s usually a broken extension spring. Spring replacement on an extension system runs $180 – $340 in Hudson, and we always replace both springs at once even if only one failed. Replacing just one leaves the door unbalanced, which strains the opener and wears out the new spring faster. For safety, extension springs should always have a containment cable running through the center, and we check those on every job. If a spring snaps, that cable is what keeps the broken coil from flying across the garage.
Preventing Uneven Lift on Older Doors
An unbalanced extension spring pair is the top cause of doors that lift crooked or stop halfway. We measure the door’s weight and match spring pairs to it, then adjust the tension so the door stays put when opened manually. That matters on Hudson’s older one-piece doors, where even a half-inch of sag changes how the whole assembly rides.
Safety Cable Installation
Many older Hudson garages have extension springs without safety cables, which is a genuine hazard. When those springs break, the coil shoots backward with serious force. We install galvanized safety cables for every extension spring replacement and recommend them on any door that lacks them.
Garage Door Spring Installation in Hudson
Garage door spring installation in Hudson covers both brand-new spring systems and retrofits on older doors that were never designed for modern hardware. On a new install, we size the springs to the exact weight and travel of the door, which means measuring cable drums, track radius, and panel weight before ordering parts. On Hudson’s older doors, installation often means more than swapping springs: the end bearing plates, drums, and cables on original mill-era hardware are usually past their service life too.
A standard torsion spring installation in Hudson runs $180 – $340, which includes both springs, labor, and a full balance test. If the job requires new drums, cables, or end plates because the old hardware is corroded or obsolete, we quote that separately and on paper before work begins. You’ll never get a surprise line item after the fact. For homeowners deciding between repairing old hardware and converting to a roll-up door, we walk through both options with real numbers, not sales pressure.
Torsion Spring Replacement
Torsion springs are the horizontal coils above the door that do the lifting, and they’re rated for a set number of cycles before they fail. When they go, the door won’t move and the opener will strain if you try. We replace torsion springs in pairs, match them to the door’s weight, and wind them precisely so the door balances perfectly.
When Installation Becomes a Retrofit
Some Hudson doors, especially the old 7-by-6 carriage-house openings near the Assabet Village, can’t take a standard torsion conversion without custom work. In those cases, we explain whether a roll-up retrofit makes more financial sense than continuing to patch a door that’s fighting the opening size. The answer isn’t always a new door, but sometimes it is, and we’ll tell you straight.
Trusted Brands We Service in Hudson
Our techs are certified to service eight major garage door brands, including LiftMaster, Chamberlain, Genie, and Raynor equipment found throughout Hudson. If your opener is a Chamberlain and your springs are reading like a mystery part number, our tech arrives already knowing what to look for. That brand training means faster diagnosis, correct parts on the truck, and no second trip while we order something. For Hudson customers, we keep common spring sizes and hardware stocked locally so repair turnaround stays short.
Common Garage Door Spring Repair Problems We See in Hudson Homes
- Snapped torsion springs after a cold snap. Hudson’s freeze-thaw cycles expand and contract metal springs, and a spring that’s near the end of its cycle rating will fail on the first cold morning of the season. We see this happen most often in late January and early February.
- Rusted bottom brackets and cables from Route 62 road salt. Vehicles tracking salt into garages near Route 62 and 495 send moisture and chloride straight onto the hardware at the door’s base. Bottom brackets corrode until they seize, and cables fray against rusted pulleys.
- Stretched extension springs on one-piece mill-era doors. The original doors in Assabet Village carriage houses run on long extension springs that lose tension gradually. By the time the door feels heavy or the opener strains, the springs have been failing for months.
- Wrong-size springs from a previous quick fix. We often see doors on Hudson’s mid-century ranches that were “repaired” with whatever spring was in the last tech’s truck. A mismatched spring makes the opener work harder and shortens the life of every component on the door.
Pricing for Garage Door Spring Repair in Hudson, MA
Spring repair in Hudson runs $180 – $340, and that’s the range you’ll see on your written quote. The exact number depends on spring type and door weight, not on how busy our schedule is. Cable repair runs $130 – $250, track realignment $120 – $240, and roller replacement $110 – $220. If a full new door is the right call for an undersized or rotted opening, Hudson homeowners can expect $700 – $2,200 installed. Every quote is locked before work starts, so the invoice matches the number you approved. Call (512) 883-4374 for a free estimate specific to your door.
| Service | Typical Hudson Price Range |
|---|---|
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2,200 |
The Hudson Garage Door Problem Most Companies Miss
Hudson’s Assabet Village garages were built around horse-drawn carriage clearances, and many still have door openings only about 7 feet wide by 6 feet tall. That’s too low and narrow for a modern standard sectional door, which is why spring work on these openings often means servicing a one-piece door or converting to a roll-up rather than just swapping a torsion spring. A tech who doesn’t know Hudson’s housing stock will quote a standard spring replacement and miss the bigger issue entirely. We don’t.
In the Assabet Village area near the old shoe mills, we serviced a 1930s mill-worker cottage whose detached carriage house still had a one-piece wooden overhead door on original extension springs that had stretched and sagged unevenly. Road salt tracked in off Route 62 had pitted the bottom brackets and hinges, and the door balance was so far off that the homeowner thought the opener was dying. We replaced both extension springs, freed the drum-and-cable assembly, and dialed in track alignment so the door opened smoothly by hand before we ever let the opener lift it.
For Garage Door Spring Repair that accounts for how Hudson homes were actually built, we’re the team that gets it right the first time. And if you’re somewhere in the wider Hudson area, our techs cover every neighborhood from downtown to the Route 495 corridor.
We Also Serve Cities Near Hudson
If you’re just outside Hudson, we regularly run spring repair jobs in Marlborough, Maynard, Clinton, and Northborough. Our scheduling is coordinated from the Boston office, but the crews live and work locally, so we know these roads and garages as well as Hudson’s own. Same written pricing, same 365-Day Done Right Promise, same live arrival tracking.
Serving Hudson, MA - Our Local Coverage Area
We’re based in the Hudson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Garage Door Spring Repair in Hudson
In most cases we can repair the extension springs and get your one-piece door working again for $180 – $340. The real question is whether the door and opening make sense to keep. If the springs are the only issue, repair is straightforward. If the door panels are rotted, the tracks are rusted through, or the opening is too small for the car you actually park there, we’ll show you both options with real numbers. A roll-up retrofit on a 7-by-6 opening usually makes the door usable again without rebuilding framing. Call (512) 883-4374 and we’ll give you an honest assessment over the phone.
If the opener motor runs but the door won’t move, it’s almost always the springs, not the opener. A door that won’t budge, feels heavy by hand, or sits crooked in the tracks points to spring failure. Openers fail differently: grinding gears, a motor that hums but does nothing, or remote issues. The tell-tale test: pull the red release cord and try lifting the door by hand. If it’s extremely heavy or won’t stay up, the springs are the problem, and the opener is just a symptom. We’ll diagnose it for free over the phone at (512) 883-4374.
It’s the combination of road salt from Route 62 and 495 plus Hudson’s freeze-thaw cycle. Salt tracked into the garage settles on bottom brackets, hinges, and cables, accelerating corrosion. Then the winter temperature swings expand and contract the metal, which breaks down spring tension and lubrication faster than in milder climates. That’s why Hudson doors often need spring work well before their rated cycle count. We use galvanized and rust-resistant hardware where we can, and we’ll point out what’s preventable on your specific door.
Torsion springs are the coils mounted horizontally above the door opening, and they wind and unwind to lift the door. Extension springs stretch along the horizontal tracks on either side of the door. Most Hudson homes built after about 1960 use torsion springs. The older mill-era one-piece doors in Assabet Village almost always use extension springs, which is why they stretch, sag, and rust differently. Both types we replace in pairs, and both fall within the $180 – $340 range in Hudson.
Yes, we service all four, along with four other major brands. Our techs are trained on LiftMaster, Chamberlain, Genie, and Raynor equipment, and we see plenty of older Craftsman openers in Hudson’s mid-century ranches. Most opener issues we find are actually spring problems, which is why we check the door balance first before touching the opener. Call (512) 883-4374 for a free estimate and we’ll tell you what’s actually wrong.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair, serving Hudson since 2002.