Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Spring Repair Across San Antonio
A snapped torsion spring means your garage door isn’t opening, period. In San Antonio, spring replacement typically runs $180 – $340 depending on the spring’s cycle rating and your door’s weight, and our techs arrive with the parts on the truck to do it in one trip. We serve every corner of San Antonio, from the vintage bungalows of Jefferson and Monticello Park to the newer subdivisions in Stone Oak and Alamo Ranch, plus the acreage properties and detached workshops out toward Helotes and Schertz. You’ll get a written price before any wrench turns, and a live person answers when you call (512) 883-4374, day or night.
Why Marlow Garage Door Repair Is San Antonio’s Preferred Garage Door Spring Repair Company
Marlow has been fixing garage doors since 2002, and our Garage Door Spring Repair team has seen every failure mode this city can throw at a torsion spring. We’re part of the Relay Home Co. family, which means we’re independently owned and operated here in San Antonio, but we answer to The Relay Standard on every job: background-checked, uniformed techs, a live arrival window you can track from your phone, before-and-after photos, and a digital invoice you pay from a link. No four-hour waiting windows. No “the tech will call you sometime.” You watch us drive to you.
Jaylen Ross leads our crew, and he built our reputation on one rule: the price we quote is the price you pay. Every spring repair is covered by the 365-Day Done Right Promise. If that spring fails or the door doesn’t balance right within a full year, we come back and make it right, free. Written on the invoice, not buried in fine print. San Antonio homeowners don’t have time for vague promises, so we don’t make any.
Broken Garage Door Spring in San Antonio
Broken Garage Door Spring jobs are the most common call we run in San Antonio, and the reason is local: this city’s alkaline, calcium-heavy water accelerates rust on torsion springs, drums, and end bearing plates, especially in garages that trap humid Gulf air. When a spring snaps, the door becomes dead weight, often with one corner jammed in the track and a cable hanging loose. In San Antonio, spring replacement runs $180 – $340, and that includes a spring rated for the heavy, oversized doors we see all over this city’s acreage properties.
High-Cycle Spring Replacement
Most budget springs are rated for 10,000 cycles, which on a door opened three times a day is under ten years. San Antonio’s heat and humidity eat that lifespan faster. We quote high-cycle springs rated for 25,000 cycles or more, which simply means fewer replacements over the life of your door.
Repair vs. Replace
If the spring snapped but the door, tracks, and opener are still solid, we replace the spring and balance the door. If the drums or bearing plates are rusted through, we’ll show you photos and give you a written price for the full repair before touching anything.
Garage Door Extension Spring in San Antonio
Garage Door Extension Spring failures are the second most common spring job in San Antonio, and they hit hardest on detached workshops and older single-car garages where the springs stretch along the horizontal track. These springs work under constant tension, and on the heavy original wood doors you find in Jefferson and Monticello Park, or on oversized insulated sectional doors in Alamo Ranch, they stretch, fatigue, and snap. Extension spring replacement in San Antonio falls within the same $180 – $340 range, and the real difference is choosing a spring actually rated for your door’s weight.
Pairing Springs to Heavy Doors
A 300-pound wood sectional door needs a heavier spring than a lightweight steel door. When springs are undersized or mismatched, one side stretches faster, the door runs crooked, and the other spring follows it to failure within months. We match springs to the actual door weight, measured on site.
Safety Cable Installation
Extension springs should always have a safety cable running through the center. If one snaps, the cable keeps the spring from flying across the garage. We install these on every extension spring job, and we’ll add them to existing doors where they’re missing.
Trusted Brands We Service in San Antonio
Our techs are trained on eight major garage door brands, so the person walking up your driveway already knows your specific door. In San Antonio we most often service LiftMaster and Chamberlain openers paired with Clopay and Genie door hardware, and we keep common spring and roller stock on our trucks for same-day fixes across the city. Whether your door is an original 1950s wood sectional in Monticello Park or a newer insulated model in Stone Oak, the parts go in right the first time because we’ve seen that exact setup before.
Common Garage Door Spring Repair Problems We See in San Antonio Homes
- Rust-accelerated spring failure: San Antonio’s alkaline water and humid air attack torsion springs and bearing plates faster than in drier climates. On detached workshops where moisture lingers, springs often snap years before their rated cycle count.
- Extension springs on oversized doors: Homeowners replace an original wood door with a heavier insulated model but keep the old springs. The undersized springs stretch and fail, usually within a few thousand cycles.
- Opener strain from unbalanced doors: A door that’s suddenly heavy to lift manually is telling you a spring is fading. Ignore it, and the opener motor works double-time until gears strip or the motor burns out, especially on acreage properties where doors run multiple times a day.
- Mismatched springs from previous repairs: A previous tech replaced one spring but not the other, or used a different cycle rating on each side. The door runs uneven, cables wear fast, and the newer spring dies early. We always replace springs in matched pairs.
Pricing for Garage Door Spring Repair in San Antonio, TX
Every job gets a written price before work begins. Here’s what spring repair and related work costs in San Antonio:
| Service | San Antonio Price Range |
|---|---|
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Garage Door Repair | $150 – $600 |
The final number depends on your door’s weight, whether we’re replacing one spring or a matched pair, and the cycle rating you choose. You’ll see the exact quote in writing before we start, and that number won’t change when the job is done. Estimates are free, and you never pay until you’ve approved the price.
We Also Serve Cities Near San Antonio
Our crews run daily jobs in Converse, Universal City, Schertz, and Helotes, plus the unincorporated acreage around Loop 1604 and beyond. If you’re outside the city limits but still in the San Antonio metro, Garage Door Spring Repair in San Antonio covers you with the same one-trip service and written pricing. Call and we’ll give you an honest arrival window for your area.
Serving San Antonio, TX - Our Local Coverage Area
We’re based in the San Antonio area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Garage Door Spring Repair in San Antonio
In San Antonio, most standard springs last 7 – 12 years, but the city’s alkaline water and humid garage air often cut that shorter on detached workshops and older doors. We recommend a spring inspection whenever you notice the door getting heavier or running uneven, and we’ll tell you honestly whether a spring has life left or is nearing failure.
Yes, and we’ve done it many times. In the Jefferson neighborhood, our tech replaced a snapped torsion spring on a 1950s original wood sectional door where the homeowner wanted to keep the vintage panels. We swapped in a high-cycle torsion spring and new rollers while preserving the heavy wood, then adjusted the opener rail and track alignment. Your door keeps its character, and the new spring is rated for 25,000 cycles.
The usual culprit is undersized springs. Your workshop door is probably heavier than the springs were rated for, and years of humid Gulf air stretch the metal until it gives. We measure the actual door weight and install matched springs rated for that load, plus safety cables, so the next pair lasts far longer. Call (512) 883-4374 and we’ll inspect the setup in one visit.
Almost always, yes. A door that suddenly feels heavy to lift manually means a spring has weakened or snapped, and your opener is now doing the spring’s job. Keep running it and you’ll burn out the motor or strip the gears. In San Antonio’s heat, this failure happens faster on acreage doors that cycle multiple times a day. Shut the opener off and call us, we’ll diagnose it on site.
Yes, and one-trip is our standard. We carry a full range of torsion and extension springs, rollers, cables, and drums on the truck, so we don’t need to leave and come back when we’re 20 minutes down a county road. We also carry high-cycle springs rated for the heavy sectional doors common on acreage workshops, so the fix lasts. Call (512) 883-4374 for a free estimate and a live arrival window you can track.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair, serving San Antonio and the surrounding metro since 2002.
Call (512) 883-4374 for a free estimate on garage door spring repair in San Antonio. A real person answers, every time.